Americans and their drywall mountings.
In Africa we attach these suckers to brick or concrete walls with 8x65mm Rawl bolts. Because you never know when someone is going to use your network rack as a ladder to get into the roof space.

Stick built garbage is most of what’s built here. Built to be disposable like a razor and plastic forks. Would have to bracket both sides of a stud or use u bolts depending.
I have some wall mounted things that didn’t have a mounting span that matched the studs. So I mounted a 2x4 to the studs and then mounted the thing to the 2x4. Shit isn’t going anywhere.
But I wish it was more like the old mirror where the mounting rings were already spaced the same as the studs because it wasn’t designed either to fail or by someone who either didn’t know or care about how to properly mount something.
We use redheads/drop anchors here too, and I vastly prefer them, if there’s brick or cinder block to mount to.
whatever that black cord is, it’s putting in some serious work holding up the rest. things would have been much worse without it
Psych Ward Storytime!
One time a lady was screaming at me in a foreign language while trying to hit me with a phone receiver on one of those shortened institutional phone cords that’s only like 10 inches long. She keeps tugging at it to hit me with it and missing because it’s so short. I figure I’ll let her get her feelings and energy out then we can pull out the translator and talk properly.
She then catches a bout of hysterical strength and rips the entire phone assembly, receiver, body, cord, and the wall anchors
COMPLETELY.
out of the wall,
…and starts swinging the 5lb metal box at me like a flail on a phone receiver handle with a phone cord whip.
Security had her on the ground in seconds, so nobody got seriously hurt, but it was WILD to see up close and personal.
“They hold 50 pounds each. Four times 50 is 200 pounds, this thing can’t weigh more than that. It’ll be fine.”
Hanging shit on walls, and tying shit to the top of a car are two areas my dad passed on a healthy paranoia about to me. It takes me longer to tie a sheet of plywood to the roof rack than it does to drive home from the store. But, I’ve never once lost anything off the roof of my car, and I’ve never had anything come down from a wall like this.
In the south, the proper way to secure lumber to the roof of the car is with your left hand.
That’s how we carry pine trees home in Canada. Windows open, arms holding it on top, or hanging out the back of your trunk.
Good times.
Well and people forget even if the toggle bolt can hold the weight, can the drywall be trusted to?
I’d like to take a moment to say fuck the standard in the box plastic expansion drywall anchors

Every other type of drywall anchor is better and only for a few cents more. These always go in the trash.
EZ Anchors all the way

100% will never use these again because when they do pull out partially, like from using them to anchor cat perches, they just spin, and you have to make a big hole to remove them.
Not worth it.
💯 Those are my go to replacements. If it’s really heavy use toggle and probably try to find a stud to bare most of the weight.
But for everything else threaded anchors. Sure they leave a bigger hole, but you get a much bigger hole if something falls out. Better to secure it right once.
You’re saying we need a bare stud to make the hole bigger.
Are you’re sure you’re not the wife? With all the hammering with studs and all.
I’m sorry I can’t help it.
My wife thinks these sucks. I cant convince her that these are not to be hammered into the drywall…
I love em
Wh… what? You drill them in… why the hell would you hammer them in???
Because you’re his wife silly.
Yeah, cannedtuna! You’re sc00ters wife!
I use these because you can take them out and reuse them, and the screw comes out and goes back in.
Toggle bolts are stronger, but you can’t take the screw all the way out without losing the back piece, that limits their utility somewhat.
I hate fastening anything to drywall. To me all the different flavors of anchors are just a good indicator that there’s no damn good way to do this. Whenever I can get away with it, I will misuse drywall hooks to hang rather than fasten things to drywall.
These are easy to install, leave only a pinhole in the wall and some are rated for 50lb loads.

Everything reminds me of her…
This evening
lol I’m not the only one.
I’m partial to snaptoggles myself
That was my first thought, “who thought drywall would hold up a wall mounted rack?!” There’s a reason they put plywood in there
So it’s plywood screwed to stud and rack screwed to plywood?
That is what I usually see. But for network equipment. Not servers. Those should always be in floor racks
I mean one anchor that can hold isn’t fine neither.
The thing most people forget into account is the safety margin (not just for anchoring things to the wall).
If you need to hang 15lbs and take an anchor for 15lbs, I sure hope that your wall is pristine and you are a pro anchor installer because you have 0 wiggle room.
If one will hold it, then 4 is good insurance.
That’s always been my approach to tying/strapping things down, whether on a roof or trailer.
I’ve lost about 25% of all the tie down straps I’ve ever owned. They’re on the road, somewhere. But never a load.
Flex in materials is a bitch.
Now wall anchors are only for light stuff. You want some weight, then I’m doing lags into studs, even if that means I need to mount some wood across studs first.
Lags into studs is how I mount my safes. Nothing else will do.
Speaking of tying things to the roof of a car. I was moving my bed from one house to another but didn’t have a truck to move it. We strapped the bed to the top of our Nissan Versa and drove across town in the middle of the night at like 15 mph. Bed didnt budge.
Good thing you didn’t have bed budge.
I always secure the load in my truck bed even if there is zero chance of it getting free on regular roads. I’d rather it dodn’t shift around and definitely don’t want the wind to suck it up and possibly out on the highway.
Grew up doing farm work where a rut or other dip in a field could occasionally lauch things around when going too fast, including people chilling in the bed…
My dad passed a certain healthy paranoia on to me. But now he seems to have forgotten it all… Quick tug on a strap, wiggle the object a little, “yup, looks good!”
It was probably for the best. Nobody with cable management like that deserves to have a server.
Trainee: “Well anyway, I’m gonna clock out. See you on Monday.”
And they should, their free time is theirs.
Now you can easily reach the back… win win
There are servers in this state all around the world and they stop working as soon as anyone tries to fix them so they’re kept just like this.
This is why the voice data video people are not allowed to mount equipment racks.
At least the firewall is still up.

Similarly, the first computer bug:

wall mount setups should automatically be built with framing stud spacing in.mind
Is that universal?
apparently not, but it should be
Phew. Good thing they attached those safety cables!
Did you push the thumbtacks all the way in? I bet you didn’t.
Its really the companies fault for having walls.
I really doubt whoever is administering the rack is the same person who hung the rack in a commercial location like this.
















