• itisileclerk@lemmy.world
    link
    fedilink
    English
    arrow-up
    25
    ·
    7 hours ago

    Back in those days, DJ played Spectrum game on the air. I taped the game on Cassette and after that played the game. Don’t remember which game was.

      • Noel_Skum@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        25
        ·
        5 hours ago

        We used to load computer games from a cassette tape. You could copy games with a back 2 back tape deck / ghetto blaster.

        If you played the screechy computer noises over the airwaves someone could record the game off the radio.

        N.B. I’m not OP

        • ChickenLadyLovesLife@lemmy.world
          link
          fedilink
          English
          arrow-up
          7
          ·
          2 hours ago

          My friend had a VIC-20 but without the tape drive (which was optional). We would have to type a game (written in BASIC) into the computer before we could play it. My friend would try and leave the machine on as long as possible so we didn’t have to keep retyping it, but his mom always turned it off at night. For whatever it’s worth, that kind of shit really teaches you accuracy.

      • bstix@feddit.dk
        link
        fedilink
        English
        arrow-up
        11
        ·
        5 hours ago

        They used to broadcast code on FM radio.

        Listeners could record it to tape and insert the tape in the computer’s tape drive to run the code.

        • ripcord@lemmy.world
          link
          fedilink
          English
          arrow-up
          5
          ·
          5 hours ago

          Considering the lack of paity, error correction.imdo, it’s pretty amazing that worked at all, ever. Even at those low bit rates.

          • bstix@feddit.dk
            link
            fedilink
            English
            arrow-up
            8
            ·
            4 hours ago

            The most common tape formats did use a parity bit, and the data was doubled, so that it could attempt to correct it if an error occurred.

            The signal was coded as pulse-width modulation, so the amplitude didn’t matter much as long as the zero crossings were timed within an acceptable threshold. I don’t know the exact width of these pulses, but it worked fine when copying a tape at double speed or more.

            • Light-DelaBlue@jlai.lu
              link
              fedilink
              English
              arrow-up
              3
              ·
              2 hours ago

              and amstrad was smart enough its separated code into “blocks” if a block failed you can just rewind and try again. it was strangely quite robust honestly.

          • addie@feddit.uk
            link
            fedilink
            English
            arrow-up
            5
            ·
            5 hours ago

            ZX Spectrum tape file format had a ‘checksum’ at the end of each block, which was just an XOR of all the bytes in the block, basically parity. Lead to a whole pile of R Tape loading error messages when your tapes were going a bit dodgy. CPU probably wasn’t fast enough to read the tape and do error correction at the same time.

            Describing the data rate as ‘low’ kind of understates it. Averages 170 bytes per second. A ZX Spectrum 128K game that took up the entire memory could take nearly 13 minutes to load.

            https://sinclair.wiki.zxnet.co.uk/wiki/Spectrum_tape_interface#Blocks

  • MonkderVierte@lemmy.zip
    link
    fedilink
    English
    arrow-up
    10
    ·
    6 hours ago

    Yeah? Like, isn’t this how it usually goes with Commodore? I don’t own one but from i’ve read, typing the program off was how you usually did things on it.

    • Random Dent@lemmy.ml
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 hour ago

      Yeah I’m old and I remember my parents buying magazines that had software in them that was just a printout that they’d type in by hand on a ZX Spectrum.

    • nyan@lemmy.cafe
      link
      fedilink
      English
      arrow-up
      1
      ·
      3 hours ago

      It was one option for the home computers of that era, but not the only one. You could buy software on cassette tape, 5 1/4" floppy, or (for the Commodore 64 and VIC-20, anyway) cartridges similar to those used by game consoles of the same era. I’m not sure that some people I knew who had C-64s ever typed a listing into them or knew any commands except for those for tape and floppy access.

      • lost_faith@lemmy.ca
        link
        fedilink
        English
        arrow-up
        1
        ·
        2 hours ago

        I had some commodore 64 books that had programs I “wrote” from the book. Silly games but fun to learn to write when I was a kid. Also had purchased and BBS origin games

        • rumba@lemmy.zip
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 hour ago

          I had an atari 130XE, parents didn’t spring for the disk or tape, I had some carts and a book with some sample programs.

          We typed the Big Bang sample into memory for 3 hours. it made a graphical representation of the big bang over 15 seconds.

          it was kinda neat, but honestly underwhelming.

  • PerfectDark@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    81
    ·
    17 hours ago

    I came across a nice little preservation story that I couldn’t resist writing about!

    Back around 1980, Canadian university student Steven McDowell created an air traffic control simulation for the Commodore SuperPET, written in Waterloo microAPL. He thought the program had been lost forever, until more than forty years later, when he discovered three and a half pages of its original source code printed on old dot-matrix paper. Instead of just archiving the listing, he painstakingly typed it back into an emulator and spent around 40 hours debugging and reconstructing the software until the little aircraft were flying again!

    Nice example of how easily early computing history could disappear, and how something as ordinary as a few surviving sheets of paper can bring it back. I’ve written a tiny little article about McDowell, the unusual SuperPET and the recovery of his program. Hope you enjoy it!

  • TryingSomethingNew@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    44
    ·
    16 hours ago

    There was an Apple ][ magazine that printed a program in hex each month. Pages and pages to type in. Get it all right and you had yourself a new program. Taught you patience if nothing else.

    • uhmbah@lemmy.ca
      link
      fedilink
      English
      arrow-up
      4
      ·
      4 hours ago

      Oh ya. Waiting for the school to open at 7am. We reserved time slots to use the Apple 2 ( the only school in the city to have a computer ) to type in those programs. First it was tape, then floppies.

      I’ll be retiring I.T. in a couple of years LOL

      • ChickenLadyLovesLife@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        2 hours ago

        My 9th grade programming class had a bunch of Apple IIe computers. They were great for the time, I guess. I spent most of the semester recreating the Battlezone arcade game on it, while the rest of the class struggled to get a key-driven menu working.

    • palordrolap@fedia.io
      link
      fedilink
      arrow-up
      19
      ·
      16 hours ago

      There were multiple magazines like that for all the various 8-bits. I have a stack of old Compute!'s Gazettes that have both BASIC type-ins as well as hexadecimal listings. And I spent hours typing those in back in the day.

      I liked the BASIC ones better because they were easier to modify on the fly or after the fact. Once you’d typed in a few programs it was hard to not read and understand the program rather than just copy it.

      The hex ones were more difficult, but it was often possible to pick out well-known memory addresses and opcodes giving the potential to know what and where to POKE to make subtle changes later on.

      The really good listings came with a checksum program that you typed in first (once, then saved to disk or tape for future use), or even a dedicated hex editor with checksum, so that it would pick up mistakes. Not where. Only that the line you typed must have an error in it.

    • limer@lemmy.ml
      link
      fedilink
      English
      arrow-up
      8
      ·
      edit-2
      16 hours ago

      I did that a lot… and I printed my code on sheets of paper; I just feel weird reading OP article.

      Edit ( because I also printed out sheets of paper with my programs from the commodore64).

    • heartSagan5@lemmy.zip
      link
      fedilink
      English
      arrow-up
      3
      ·
      13 hours ago

      In hex? But when you type a character, it isn’t the hex value? Or was there a special keypad used?

      I’d really love for someone to find a way to add hexadecimal keypad for these IPv6 addresses though.

    • bashibazouk@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      12 hours ago

      Same but with a Timex Sinclair 1000 and it’s respective magazine. 2k memory but I had the 16k upgrade module, and of course the cassette tape deck to save everything on…

  • Mulligrubs@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    17 hours ago

    My first computer, and it was an antique by the time I had it. The disks were like the size of a dinner plate.