Yes the solder joints are terrible, but it works and I’m proud of myself.

  • roadrunner_ex@lemmy.ca
    link
    fedilink
    English
    arrow-up
    33
    ·
    2 months ago

    I’ve been so on the fence about attempting to solder, but it frightens me the idea of causing a little sparky fire.

    So, good on you!

    • early_riser@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      53
      ·
      2 months ago

      I’m blind (the device in back with the Freedom Scientific logo is an assistive magnifier). Both cooking and sewing are common skills taught in rehab centers for the newly blind, and soldering has aspects of both, being mindful of something very very hot near your hands, and having a certain amount of dexterity.

      Here’s what I did to build up confidence. I bought a bunch of perf board and resistors and I just started soldering the resistors to the perf board, that’s it. No goal other than to practice soldering. I had tried one of those beginner’s first electronics kits off Amazon, the ones with just an LED and a switch or whatever. I got discouraged because I messed up. So I figured if I didn’t actually try to make something, I could relax and focus on soldering technique. I was eventually able to solder header pins onto a Raspberry pi zero and even terminate a coax cable, and now I can say I replaced a GB cart battery.

      • idiomaddict@lemmy.world
        link
        fedilink
        English
        arrow-up
        25
        ·
        2 months ago

        That’s impressive as hell, tbh. I’m glad rehab centers focus on such useful, otherwise seemingly inaccessible skills

      • MinnesotaGoddam@lemmy.world
        link
        fedilink
        English
        arrow-up
        21
        ·
        2 months ago

        my dude you did this with major vision loss? i take back my earlier compliment. that’s not deserving of a smooch and a butt grabby. that’s deserving of a full on makeout and maybe a little hand down the pants butt grabby. make sure to ask yourself for consent first.

    • Godort@lemmy.ca
      link
      fedilink
      English
      arrow-up
      16
      ·
      2 months ago

      It’s a useful skill to know, and it’s not super hard to learn. It just takes some practice.

      As long as you have some common sense(eg: dont set the iron down on something flammable) you shouldn’t need to worry about fires.